254 SMO Fastener : Manufacturer, Stockist & Supplier : Kinnari Steel
254 SMO Fasteners : Manufacturer, Stockist & Supplier : Kinnari Steel
254 SMO Fasteners have special quality finishing and duress for long life, high pressure and zero defects. Kinnari Steel is 254 SMO Fasteners Manufacturer, 254 SMO Fasteners Stockist & 254 SMO Fasteners Supplier.
For Your Requirement of 254 SMO Fasteners
254 SMO Fasteners
The product differentiation is based on the premier finish with the minimum burr at the edge . The v shape formation for perfect welding and fabrication of the fittings in mega projects in oil and gas industry for the long life of the product.
Orders at Kinnari Steel are guaranteed fast delivery in the country. The main reason being we have an excellent warehousing and storage facilities for both finished and semi-finished goods.They are made ready as per the urgent requirements of the customers. They are manufactured to sustain very high pressure and product warranty.
A lot of emphases is placed on the packing and packaging . The 254 SMO Fasteners are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps.
Contact us for a quick quote:
All 254 SMO Fasteners are offered with an NACE 3.1 Certification, Mill Test Certification and ISO 17025 Standards by a Government of India approved Laboratory. Positive Material Identification is done on all raw material procured at Kinnari Steel Corporation.
Kinnari Steel have exported to over 45 countries including UAE, UK, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazil, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angola & Sri Lanka.
The 254 SMO Fasteners are used in Hardware , Petro-Chemical Industry, Oil and Gas Industry , Nuclear Industry, Pulp & Paper Industry, Research & Development , Mega Projects & Defense & Development Industries. In fact wing to the special grade of steel, they are used for all critical applications.
Stainless steel grade 254 SMO™ is a very high end austenitic stainless steel. It is designed with a combination of impact toughness resistance to chloride stress corrosion cracking, and pitting and crevice corrosion with the strength that is twice that of the stainless steel 300 series.
For certain applications, grade 254 SMO™ has been reported to be a cost-effective substitute for high nickel and titanium alloys. It is known to possess excellent workability as well.
The following sections will discuss in detail about stainless steel grade 254 SMO.
|254 SMO||S31254||1.4529||X1CrNiMoCuN20-18-7||2378*||Z1 CNDU 20.18.06AZ*|
The chemical composition of stainless steel grade 254 SMO™ is outlined in the following table.
The physical properties of stainless steel grade 254 SMO™ are tabulated below.
|Density||8 g/cm3||0.289 lb/in3|
The following table shows mechanical properties of stainless steel grade 254 SMO™.
|Tensile strength||680 MPa||98600 psi|
|Yield strength||300 MPa||43500 psi|
|Modulus of elasticity||195 GPa||28300 ksi|
|Shear modulus||75 GPa||10900 ksi|
|Elongation at break||50 %||50 %|
The thermal properties of stainless steel grade 254 SMO™ are tabulated below.
|Thermal expansion co-efficient (@20-100°C/68-212°F)||16.5 µm/m°C||9.17 µin/in°F|
|Thermal conductivity||14 W/mK||97.2 BTU in/hr.ft².°F|
Other designations that are equivalent to stainless steel grade 254 SMO™ include the following.
|ASTM A813||ASTM A469||ASTM A269||ASTM A240||ASTM A182 (F44)||ASTM A814||ASTM A312||ASTM A249|
Fabrication and Heat Treatment
Stainless steel grade 254 SMO™ is quite tough to machine due to the extremely high work hardening rate and lack of sulfur content; however using sharp tools, overpowered machine tools, positive feeds, good amount of lubrication, and slow speeds tend to provide good machining results.
Welding of stainless steel grade 254 SMO™ requires filler material without which it results in poor strength properties. Filler metals such as AWS A5.14 ERNiCrMo-3, and alloy 625 are recommended. Electrodes used in the process, have to match with AWS A5.11 ENiCrMo-12.
Annealing of this material should be performed at 1149-1204°C (2100-2200°F), which should be followed by a water quench.
Forging, upsetting and other operations relating to this material can be performed at 982 – 1149°C (1800 – 2100°F). It is recommended that temperatures do not exceed this range as it would result in scaling and reduction in the workability of the material. To re-attain maximum corrosion resistant properties, it is advisable to perform post-process annealing.
Cold working can be carried out using all the traditional methods; however the process would be tough due to its high work hardening rate. The result will provide the material with increased strength and toughness.
Stainless steel grade 254 SMO™ does not respond to heat treatment. Hardening is possible only through cold reduction.
Stainless steel grade 254 SMO™ is used in the following areas:
- Salt water handling
- Tall oil distillation columns
- Flue gas desulfurization scrubbers
- Components used in petroleum production
- Food processing equipment
- Process equipment in chemical industry
- Bleaching equipment in the pulp and paper industry
- Flue-gas cleaning
- Heat exchangers
Problems that customers face when they buy from other companies
- Non availability
- Late deliveries
- Poor packaging/ Unprofessional Packing
- Poor surface finish
- No Mill test report
- No control on quality and testing
- High rejection rate
- Poor after sales service
- Supply of wrong grades
- Material inconsistent with ASTM Standards
- Very hard material for use
Benefits that our company offers:
- World class buying experience
- Very quick delivery
- Mill test report/ Digital Mill test report in accordance with EN10204 NACE 3.1, NACE 3.2
- 3rd Party inspection
- High-pressure sustainability
- Impeccable surface finish
- Product replacement warranty
- After sales support and service
- High-quality packaging/ Premium Packaging and Packing for sea and Air transport.
About Kinnari Steel : Kinnari Steel is a privately held manufacturer, stockist and exporter. It deals in Stainless steel and Alloy Steel : Stainless Steel 304 , 316 , 317 , 321 , 254 SMO, Inconel , Hastelloy , Duplex Steel , Super Duplex Steel , Brass, Titanium, Tantalum etc. The products are Pipe Fittings, Tube Fittings, Flanges , Valves, Fasteners , Pipes & Tubes.