Incoloy 825 Fasteners : Manufacturer, Stockiest and Supplier : Kinnari Steel
Incoloy 825 Fasteners : Manufacturer, Stockist & Supplier : Kinnari Steel
Incoloy 825 Fasteners have special quality finishing and duress for long life, high pressure and zero defects. Kinnari Steel is Incoloy 825 Fasteners Manufacturer, Incoloy 825 Fasteners Stockiest & Incoloy 825 Fasteners Supplier.
For Your Requirement of Incoloy 825 Fasteners
Incoloy 825 Fasteners
The product differentiation is based on the premier finish of Incoloy 825 Fasteners with minimum burr at the edge . The ends for perfect welding and fabrication of the Wire in mega projects in oil and gas industry for the long life of the product.
Orders at Kinnari Steel are guaranteed fast delivery of the Incoloy 825 Fasteners in the country. The main reason being we have an excellent warehousing and storage facilities for both finished and semi-finished goods.They are made ready as per the urgent requirements of the customers. The Incoloy 825 Fasteners are manufactured to sustain very high pressure and product warranty.
A lot of emphases is placed on the packing and packaging . The Incoloy 825 Fasteners are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps.
Contact us for a quick quote:
All Incoloy 825 Fasteners are offered with an NACE 3.1 Certification, Mill Test Certification and ISO 17025 Standards by a Government of India approved Laboratory. Positive Material Identification is done on all raw material procured at Kinnari Steel.
Kinnari Steel have exported to over 45 countries including UAE, UK, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazil, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angola & Sri Lanka.
The Incoloy 825 Fasteners are used in Hardware , Petro-Chemical Industry, Oil and Gas Industry , Nuclear Industry, Pulp & Paper Industry, Research & Development , Mega Projects & Defense & Development Industries. In fact wing to the special grade of steel Incoloy 825 Fasteners are used for all critical applications.
Kinnari Steel is a manufacturer and supplier of high quality and superior finish Incoloy 825 Fasteners. We carry 2 decades of experience along with us in the supply of high nickel based alloy piping. We provide complete piping solutions to our clients. We have 40+ tons of Incoloy 825 Fasteners from 1/2” to 4” in ready stock in standard thickness. We aim to cater to urgent and timely requirements of our clients. A standard size is shipped immediately against the purchase order.
We at Kinnari Steel aim for ultimate client satisfaction. We try to provide the end to end service to our clients. All our activities are directed towards the best buying experience for our customer. Our delivery first money later approach has brought us immense goodwill and value in the industry from our clients. We always gain prominence by word of mouth. Our clients always give us good recommendations. A company that has grown multiple times in the 2 decades of operation, by word of mouth speaks volumes about our quality.
Incoloy alloy 825 is a nickel, iron, chromium alloy with additions of molybdenum, copper and titanium, with exceptional resistance to many aggressive corrosion environments.
Incoloy 825 is highly resistant to corrosion. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking and a very stable austenite structure.
The levels of molybdenum and copper enable the alloy to resist reducing agents and acids.Chromium gives resistance to oxidising conditions, such as nitric acid solutions, nitrates and oxidising salts.
The alloy is titanium stabilised to resist pitting and intergranular attack after fabrication, particularly welding, which includes heating in the critical sensitisation temperature range (650°C – 760°C).
Alloy 825 offers exceptional resistance to corrosion by sulphuric and phosphoric acids and is often the most cost-effective alloy in sulphuric acid service. Incoloy 825 is approved for pressure vessel operating temperatures up to 525°C (AS1210, AS4041), 538°C (ASME Boiler & Pressure Vessel Code, Sections I, III, VIII, IX, Cases 1936, N-188). Brittle phases may form in alloy 825 at temperatures above ~ 540°C, so it is not normally used at these temperatures, where creep-rupture properties would be design factors.
It is a nickel iron chromium alloy with additions of molybdenum, copper and titanium, with exceptional resistance to many aggressive corrosion environments.
Incoloy 825 is highly resistant to corrosion. It has a high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenite structure. The levels of molybdenum and copper enable the alloy to resist reducing agents and acids. Chromium gives resistance to oxidising conditions, such as nitric acid solutions, nitrates and oxidising salts. The alloy is titanium stabilised to resist pitting and intergranular attack after fabrication, particularly welding, which includes heating in the critical sensitisation temperature range (650°C – 760°C).
Alloy 825 offers exceptional resistance to corrosion by sulphuric and phosphoric acids and is often the most cost-effective alloy in sulphuric acid service.Austral Wright Metals can supply this alloy as plate, sheet, strip, bar, rod, wire, tube, pipe, fittings, fasteners.
Incoloy 825 is approved for pressure vessel operating temperatures up to 525°C (AS1210, AS4041), 538°C (ASME Boiler & Pressure Vessel Code, Sections I, III, VIII, IX, Cases 1936, N-188). Brittle phases may form in alloy 825 at temperatures above ~ 540°C, so it is not normally used at these temperatures, where creep-rupture properties would be design factors.
|Incoloy 825||N08825||NiCr21Mo||2.4858||XH38BT||NA 16||NCF 825||ЭП703||NC 21 FeDU|
Chemical Composition of Incoloy Alloy 825
Table 1. Chemical composition of Incoloy Alloy 825 (ASTM B163 – Heat exchanger tube)
|Nickel||38.0 – 46.0||Carbon||0.05 max|
|Chromium||19.5 – 23.5||Manganese||1.0 max|
|Molybdenum||2.5 – 3.5||Sulfur||0.03 max|
|Copper||1.5 – 3.0||Silicon||0.5 max|
|Titanium||0.6 – 1.2||Aluminium||0.2 max|
|Iron||22.0 min (~33%)|
Tensile Properties of Incoloy Alloy 825
Table 2. Typical room temperature tensile properties (not for design. Consult the relevant material or product specification for design values)
|Form||Condition||0.2% Proof Stress
The outstanding property of Incoloy 825 is its corrosion resistance. In reducing & oxidising conditions, Incoloy 825 resists general corrosion, pitting & crevice corrosion, intergranular corrosion and stress corrosion cracking. It is particularly useful in sulphuric & phosphoric acids, sulphur containing flue gases, sour gas and oil wells and sea water.
Incoloy 825 can be readily hot or cold worked. Hot working should be in the range 870 – 1180°C, finishing at 870 – 980°C. For maximum corrosion resistance hot worked parts should be stabilise annealed before use. The alloy is easier to cold form than stainless steels.
Incoloy 825 is classed as a ‘C’ alloy and is reasonably easy to machine.
The alloy is readily weldable by the normal processes (GMAW (MIG), GTAW (TIG), SMAW (manual), SAW). The joint must be clean to avoid contamination of the weld pool.
Table 5. A guide to welding consumables to be used with Incoloy Alloy 825 under various conditions.
|Normal Service||Higher Strength||Best Corrosion Resistance|
|Welding electrode||Inconel WE 112||Inconel WE 112||Inconel WE 112|
|Filler metal||Inconel FM 625||Inconel FM 625||Inconel FM 625|
|Flux cored wire||Inco Cored 625DH||Inco Cored 625DH||Inco Cored 625DH|
Incoloy 825 is stabilise annealed at 940°C. The softest structure is obtained at 980°C. Sections heavier than a sheet, strip and wire should be quenched to avoid sensitisation.
Please consult Austral Wright Metals for specific advice on your application.
ASTM Product Specifications
Table 6. ASM specifications for Incoloy Alloy 825.
|B163||Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes|
|B423||Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube|
|B424||Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221)* Plate, Sheet, and Strip|
|B425||Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825)|
|B704||Welded UNS N06625 and UNS N08825 Alloy Tubes|
|B705||Nickel-Alloy (UNS N06625 and N08825) Welded Pipe|
|B751||General Requirements for Nickel and Nickel Alloy Welded Tube|
Equivalent Grade Designations
Table 7. Other international grades that are equivalent to Incoloy Alloy 825.
|France||AFNOR||NC 21 FeDU|
Typical applications of Incoloy 825 are:
– Chemical Processing
– Nuclear Fuel Reprocessing
– Acid Production
– Pickling Equipment
Problems that customers face when they buy from other companies
- Non availability
- Late deliveries
- Poor packaging/ Unprofessional Packing
- Poor surface finish
- No Mill test report
- No control on quality and testing
- High rejection rate
- Poor after sales service
- Supply of wrong grades
- Material inconsistent with ASTM Standards
- Very hard material for use
Benefits that our company offers:
- World class buying experience
- Very quick delivery
- 3rd Party inspection
- High pressure sustainability
- Impeccable surface finish
- Product replacement warranty
- After sales support and servie
- High quality packaging/ Premium Packaging and Packing for sea and Air transport
- Government and Private Laboratory Testing
- Test certificate from ISO 17025 Standards Laboratory
- Same day shipping of the goods
- Highest stock in the country
- Stringent Quality Testing and Control
- ISO 9001:2008 , ISO 14001:2004, OHSAS 18001:2007 Certifications.
About Kinnari Steel : Kinnari Steel Corporation is a privately held manufacturer, stockist and exporter. It deals in Stainless steel and Alloy Steel : Stainless Steel 304 , 316 , 317 , 321 , Incoloy 825, Inconel , Hastelloy , Duplex Steel , Super Duplex Steel , Brass, Titanium, Tantalum etc. The products are Pipe Fittings, Tube Fittings, Flanges , Valves, Fasteners , Pipes & Tubes.