Inconel 625 Round Bars Rods ASTM B446 UNS N06625

Inconel 625 Round Bars Rods of Manufacturer, Stockiest and Supplier by Kinnari Steel

Inconel 625 Round Bar offer better creep resistance than steel and aluminum at high temperatures. Inconel alloys are also exhibit metallurgical stability. Kinnari Steel are Inconel 625 Round Bars Rods Manufacturer, Inconel 625 Round Bar Stockiest & Inconel 625 Round Bar Supplier.

Inconel 625 Round bars rods

Contact Us For Your Requirement of Inconel 625 Round Bar

Inconel 625 Round Bars Rods

Kinnari Steel Corporation has emerged as the foremost producer and supplier of Inconel 625 Round Bar. We have two decades of experience in handling the best quality nickel based alloys in the country. We have the highest stock in the country, with even the non- standard sizes incorporated. We are known for maintaining the stock of goods, as in our corporation, a new set of raw materials is ready to replenish as soon as another set is dispatched to be delivered to the customer. Our performance in the last decade has led us to a platform of immense trust by the customers. That is primarily because of the high quality of goods and services provided by us.

The past decade has shown a rejection rate of less than one percent, and that is the biggest proof of the truth behind all our claims. We have always lived up to the promise of supplying high quality goods to our clients. This is one of the primary reasons why we have a large market for this alloy too.

Contact us for a quick quote:

Know more about Inconel 625

Inconel 625 is a Nickel- Chromium- Molybdenum alloy. It basically consists of a Nickel-Chromium matrix, and Molybdenum and Niobium are added to give a stiffening effect. It is highly corrosion resistant, with exceptional resistance towards crevice formation and pitting.

Chemical properties

The compositional range for Inconel 625 Round Bars Rods is provided in the table below.
Element Content
Ni 58% min
Cr 20 – 23%
Mo 8 – 10%
Nb+Ta 3.15 – 4.15%
Fe 5% max

Some other typical properties

Property Metric Imperial
Density 8.44 g/cm3 0.305 lb/in3
Melting point 1350 °C 2460 °F
Co-Efficient of Expansion 12.8 μm/m.°C
(20-100°C)
7.1×10-6 in/in.°F
(70-212°F)
Modulus of rigidity 79 kN/mm2 11458 ksi
Modulus of elasticity 205.8 kN/mm2 29849 ksi

Specification

Standard UNS EN Werkstoff Nr. GOST BS JIS OR AFNOR
Inconel 625 N06625 NiCr22Mo9Nb 2.4856 ХН75МБТЮ NA 21 NCF 625 ЭИ602 NC22DNB4M

Inconel 625 Round Bar is best suited for sea water applications, where high tensile strength, high corrosion resistance, and excellent ability to combat chloride ion stress corrosion is needed. They are used to manufacture propeller blades for motor patrol gunboats, wire rope for mooring cables, sheathing for communication cables under the sea, and undersea equipment.

Aerospace technology also has in store a large number of applications for Inconel 625 Round Bar. That is primarily because of high tensile strength, creep resistance, and high rupture strength. It also shows immunity to fatigue, and excellent weldability. It is extensively used in aircraft ducting systems, engine exhaust systems, thrust-reverser systems, resistance-welded honeycomb structures for housing engine controls, fuel and hydraulic line tubing, spray bars, bellows, turbine shroud rings, and heat-exchanger tubing in environmental control systems.

The chemical processing field also uses this alloy on account of the ability to combat corrosion in a wide range of temperatures. Plant equipment can be manufactured with ease because it can be fabricated easily.

In the nuclear filed, it is used for reactor core and control-rod components in nuclear water reactors.Inconel 625 is an alloy of great economic value because of so many versatile applications. Therefore, it is important to be extremely careful to select the correct grade.

Know the ongoing problems

Customers are likely to get trapped in the midst of the malpractices like supplier commission. Even after paying so much, the products that they receive are not up to mark. The quality claimed by the producers has no mill report in support of the claim. The customers seldom end up with the material that doesn’t comply with ASTM standards. The alloys have poor surface finish and are too hard to be put to good use. Also due to recursive demands, most of the firms tend to run out of the raw material. Thus, the customer has to wait for days, sometimes months for the stock to be replenished. . Lack of proper knowledge often results in the supply of wrong grades. There is no control on quality and testing. The goods take forever to be delivered and when they are, they tend to lose their economic value on account of poor, unprofessional packaging. Customers are also found complaining about the lack of after sales services in transactions with most of the firms. There is no warranty associated with the product and hence, the suppliers pull off their hands as soon as the product is dispatched. Thus, even after paying a high price, the customer ends up dissatisfied.
inconel 625 round bars rods

Why do the consumers trust us?

We are one of those firms, which lay a major emphasis on making every transaction customer friendly. We ensure that our clients get a world class buying experience. Our mill reports are in accordance with EN10204 NACE 3.1, NACE 3.2. Our products go through appropriate testing, both in Government and private laboratories. We have the fastest delivery service, giving utmost priority to urgent orders. Our team adopts professional packaging methods to ensure that the products reach our clients in their best form. The impeccable surface finish and appropriate hardness of goods has impressed customers worldwide. We are careful in supplying the right grade of the material, with proper level of hardness. We specify the heat number on the raw material, so that the consumers can trace the history and application of the product. Also, our after sales services are as good as the materials supplied by us. We are available anytime of the year to attend to your grievances. Moreover, we are also highly environment friendly, as we also recycle scrap metal and convert it into the desired material of superior quality. The prices are highly competitive, and thus we ensure that the customer gets every benefit he deserves. We are extremely accessible in terms of consultation about various sizes and grades of the alloys. We provide an additional benefit of product replacement warranty in case of product failure (though the chances of failure are nil). Thus we provide all round benefits to our clients to make their deal a profitable one. Once chosen, we leave no stone unturned in proving ourselves to be the best choice of the customers.

inconel 625 round bars rods

Also View: Inconel 625 wire

Inconel 625 Round Bars Rods Manufacturer & Supplier
KSC is stockiest & supplier of Inconel 625 Round Bars Rods . Huge stock of standard Inconel 625 Round Bars Rods is in ready stock.
Manufacturer: Valbruna/Villares metals
Model: Round Bars Rods
Product ID: I625-RBR
4.1 based on 45 reviews

Back to Top