Titanium Fastener : Manufacturer, Stockiest and Supplier : Kinnari Steel

    Titanium Fastener : Manufacturer, Stockiest and Supplier : Kinnari Steel

    Titanium Fastener is known almost universally as a high-strength, low-weight material (approximately 60% of steel), but it has other very desirable properties as well, most notably high corrosion resistance, and good electrical conductivity. Additionally, in its pure forms (like Grade 2), it is very ductile and easy to work. Kinnari Steel are Titanium Fastener Manufacturer, Titanium Fastener Stockiest & Titanium Fastener Supplier.

    Titanium Fasteners

    Contact Us For Your Requirement of Titanium Fastener

    Titanium Fasteners

    Kinnari Steel is the manufacturer for Titanium Fastener which provides the best quality at a reasonable cost.


    It is a U.K. wire manufacturer specialising in the production of high performance alloys, mainly Nickel Alloys, but including Cobalt and Titanium Alloys.

    These alloys might be used in any environment that requires resistance to heat and corrosion but where the mechanical properties of the metal must be retained.

    Titanium Grade 5 – Ti6Al4V Titanium Alloy

    Titanium Grade 5 has good tensile properties at ambient temperature and a useful creep resistance up to 300°C (570°F). Resistance to fatigue and crack propagation is excellent. Like most titanium alloys, Grade 5 has outstanding resistance to corrosion in most natural and many industrial process environments. The ability to age harden this alloy makes it a good choice for such applications as springs and Titanium Fastener.

    Chemical Composition of Titanium Grade 5

    The compositional range for Titanium Grade 5 is provided in the table below.

    Element Content
    Al 5.5 – 6.75 %
    V 3.5 – 4.5 %
    H 0.015 % max
    Ti Balance

    Typical Properties of Titanium Grade 5

    Typical properties of Titanium Grade 5 are covered in the following table.
    Property Metric Imperial
    Density 4.42 g/cm3 0.16 lb/in3
    Melting point 1650°C 3000°F
    Co-Efficient of Expansion 9.0 µm/m.°C
    5.0×10-6 in/in.°F
    Modulus of rigidity
    Modulus of elasticity 105-120 kN/mm2 15230-17405 ksi
    Properties of Supplied Materials and Heat Treated Materials
    Condition of Supply Heat Treatment (After Forming)
    Annealed Age harden at 760oC (1400oF) for 16 hours and air cool.
    Spring Temper 1. Solution Anneal at 1065ºC (1950ºF) for 4 hours and air cool
    2. + Age at 760ºC (1400ºF) for 16 hours and air cool
    No 1 Spring Temper Age harden at 760ºC (1400ºF) for 16 hours and air cool
    Condition Approx Tensile Strength Approx Service Temp.
    Annealed 950 – 1100 N/mm2 138 – 159 ksi -200 to 400 ºC -330 to 750° F
    Spring Temper 1100-1400 N/mm2 159 – 203 ksi -200 to 400 ºC -330 to 750° F

    Relevant Standards

    Titanium Grade 5 is covered by the following standard:
    • ASTM B348

    Equivalent Materials

    Equivalent materials to Titanium Grade 5 are:
    • W.NR 3.7164
    • W.NR 3.7165
    • AWS 151


    • Aerospace
    • Surgical Implants
    • Jewellery
    • Chemical
    • Springs
    • Bolts
    titanium fasteners

    Problems that customers face when they buy from other companies

    • No Mill test report
    • No control on quality and testing
    • High rejection rate
    • Poor after sales service
    • Supply of wrong grades
    • Material inconsistent with ASTM Standards
    • Very hard material for use
    • Dubious Practices
    • Lack of knowledge
    • Product fails under high pressure
    • High pricing of the goods due to supplier commission
    • No inspection of the goods
    titanium fasteners

    Benefits that our company offers:

    • High pressure sustainability
    • Impeccable surface finish
    • Product replacement warranty
    • After sales support and servie
    • High quality packaging/ Premium Packaging and Packing for sea and Air transport
    • Government and Private Laboratory Testing
    • Test certificate from ISO 17025 Standards Laboratory
    • Same day shipping of the goods
    • Highest stock in the country
    • Stringent Quality Testing and Control
    • ISO 9001:2008 , ISO 14001:2004, OHSAS 18001:2007 Certifications
    • 100% In house testing of the goods
    • <1% rejection rate of the goods in over a decade
    • Distributors in more than 13 countries
    titanium fasteners


Titanium Fastener : Manufacturer, Stockiest and Supplier : Kinnari Steel
KSC is stockiest & supplier of Titanium Fastener. Huge stock of standard Titanium Fastener is in ready stock.Send your enquires on kslok@vsnl.net
Brand: KSC
Manufacturer: Kinnari Steel
Model: Fastener
Product ID: T-FA

Back to Top